No Competitors In My Backyard?

Posted on March 2, 2015 by Seth Jaffe

In Paradise Lost, John Milton wrote that “easy is the descent into Hell, for it is paved with good intentions.”  

road to hell

A modern environmental lawyer might say that the road to waste, inefficiency, and obstruction is paved with good intentions.  Nowhere is that more apparent than with citizen suit provisions, as was demonstrated in the decision earlier this week in Nucor Steel-Arkansas v. Big River Steel.

Big River Steel obtained a permit from the Arkansas Department of Environmental Quality to construct a steel mill in Mississippi County, Arkansas.  Nucor owns an existing steel mill in – you guessed it – Mississippi County, Arkansas.  Nucor brought a host of claims in various forums (Sorry; I’m not a Latin scholar and cannot bring myself to say “fora”) in an effort to derail the Big River Steel project.  It appealed the permit in Arkansas courts.  It also petitioned EPA to object to the permit.

Finally – the subject of this case – it brought a citizens’ suit under the Clean Air Act alleging that the permit did not comport with various CAA provisions addressing permitting.  The Court rightly dismissed the complaint, basically on the ground that the suit was simply an improper collateral attack on the air permit.  The 5th and 9th Circuits have reached similar conclusions in similar circumstances.

The point here, however, is that clients don’t want to win law suits; they want to build projects.  Even unsuccessful litigation can tie projects up in knots, jeopardizing project financing or causing a project to miss a development window.

The road to hell is paved with the pleadings of bogus citizen suits.

Kentucky Action on PM 2.5

Posted on November 19, 2009 by Carolyn Brown

As has been reported, EPA granted in part petitions to object to the merged PSD construction/Title V operating permit issued by the Kentucky Division for Air Quality for the addition of a 750 MW pulverized coal-fired boiler at the Trimble County facility owned by Louisville Gas & Electric Company (LG&E). EPA’s action occurred more than three years after the proposed permit and final PSD determination authorizing construction to commence. One ground for the grant of the petition was that the state permitting record did not contain adequate justification of use of the PM10 program as a surrogate for PM2.5 for PSD analysis.

 

Following submittal of additional information by LG&E, Kentucky issued its preliminary determination that many have argued was an attempt to regulate by Title V objection rather than by rulemaking.   Regardless, the Division for Air Quality determined that use of the PM10 Surrogate Policy has been shown to be reasonable for the Trimble County project. In short, DAQ concurred with LG&E that there was a lack of test data regarding the particle size distribution of the particulate matter for the combination of controls on the unit and noted that the control train was state of the art. DAQ also noted that PM2.5 is always a subset of PM10 and that PM10 BACT analyses implicitly include consideration of reductions of PM2.5 emissions. After considering the elements of the control train, DAQ concluded that there were “no known base technologies available” for a PC Boiler that would provide additional reduction of PM2.5

 

LG&E also addressed fugitive emission sources, the emergency generator and cooling tower in its submittal to demonstrate that use of PM10 as a surrogate was reasonable. Although a Class II Cumulative PM2.5 NAAQS analysis was not conducted, LG&E provided information from modeling exercises to further support its position that it was reasonable to rely on the PM10 surrogate policy. DAQ noted that in the absence of a final rule on significant impact levels for PM2.5, a PM2.5 emissions inventory and regulatory dispersion modeling system, it was not possible to conduct a cumulative PM2.5 NAAQS analysis. 

Kentucky Action on PM 2.5

Posted on November 19, 2009 by Carolyn Brown

As has been reported, EPA granted in part petitions to object to the merged PSD construction/Title V operating permit issued by the Kentucky Division for Air Quality for the addition of a 750 MW pulverized coal-fired boiler at the Trimble County facility owned by Louisville Gas & Electric Company (LG&E). EPA’s action occurred more than three years after the proposed permit and final PSD determination authorizing construction to commence. One ground for the grant of the petition was that the state permitting record did not contain adequate justification of use of the PM10 program as a surrogate for PM2.5 for PSD analysis.

 

Following submittal of additional information by LG&E, Kentucky issued its preliminary determination that many have argued was an attempt to regulate by Title V objection rather than by rulemaking.   Regardless, the Division for Air Quality determined that use of the PM10 Surrogate Policy has been shown to be reasonable for the Trimble County project. In short, DAQ concurred with LG&E that there was a lack of test data regarding the particle size distribution of the particulate matter for the combination of controls on the unit and noted that the control train was state of the art. DAQ also noted that PM2.5 is always a subset of PM10 and that PM10 BACT analyses implicitly include consideration of reductions of PM2.5 emissions. After considering the elements of the control train, DAQ concluded that there were “no known base technologies available” for a PC Boiler that would provide additional reduction of PM2.5

 

LG&E also addressed fugitive emission sources, the emergency generator and cooling tower in its submittal to demonstrate that use of PM10 as a surrogate was reasonable. Although a Class II Cumulative PM2.5 NAAQS analysis was not conducted, LG&E provided information from modeling exercises to further support its position that it was reasonable to rely on the PM10 surrogate policy. DAQ noted that in the absence of a final rule on significant impact levels for PM2.5, a PM2.5 emissions inventory and regulatory dispersion modeling system, it was not possible to conduct a cumulative PM2.5 NAAQS analysis.